Knock occurs on road bumps but not during stationary steering
A knock on bumps without steering movement should not be assigned to an assistance coupling merely because the sound seems near the column. Suspension, rack attachments, joints and body contacts can transmit noise into the cabin.
Separate road input from direction change
Record whether one-wheel bumps, braking or steering angle alters the knock. Compare with a gentle stationary direction-change test performed safely. Note recent suspension or steering work and any changed handling.
Inspect the load path
A workshop should check relevant joints, bushes, strut attachments, rack/column connections and clearances using appropriate loaded conditions. A component may appear tight with wheels hanging but move under road load. Sound inside the dash does not prove an internal column source.
If a column click also exists, document it separately. Two noises can coexist, and repairing one does not prove the other was imagined. Read assistance faults where relevant but do not use a clear scan to exclude mechanical looseness.
Verify the isolated source
Repair the demonstrated worn, loose or contacting part with correct installation requirements. Repeat the same safe road input, checking steering feel and alignment needs after relevant work. Avoid replacing the whole column without a test that supports it.
Outcome & verification
Confirm secure components, normal handling and no repeat bump knock. Record any remaining stationary click as a separate diagnostic item.
Community discussion
Owner experiences, questions and other possible solutions.
No owner experiences yet. Share what was checked and what happened.
Sign in to share your experienceHelpful votes reflect community experience. Repair outcomes are self-reported.