Cold idle is uneven on a GDI engine
Cold rough idle on an applicable GDI i30 can involve ignition, injection, air leaks, deposits or mechanical sealing. Direct injection makes valve deposits a relevant candidate, not a diagnosis from a rough first minute alone.
Capture a true cold start
Save cylinder counts, temperatures and the first idle before warm-up changes the condition. Record fuel/service history and whether the disturbance stays on one cylinder. Confirm the engine actually uses the GDI arrangement under discussion.
Compare the competing causes
A workshop should assess plugs/coils under operating conditions and inspect intake/ventilation integrity before recommending cleaning. Controlled component swaps help only when the misfire moves. If it stays, evaluate injector operation and mechanical condition as the evidence requires.
Inspect deposits where justified and assess their extent and relevance. A deposit image cannot establish injector sealing or exclude a valve problem. On an engine whose fuel does not wash the valve backs, a tank additive should not be assumed to clean those surfaces effectively.
Select a supported intervention
Use an appropriate engine-specific cleaning method only when findings support it, protecting against introduced debris. Other proven fuelling, electrical or mechanical faults need their own repair rather than another general treatment.
Outcome & verification
Repeat the same cold-soak start and compare cylinder contribution. Smooth warm idle or a completed cleaning invoice does not prove the cold fault is resolved.
Community discussion
Owner experiences, questions and other possible solutions.
No owner experiences yet. Share what was checked and what happened.
Sign in to share your experienceHelpful votes reflect community experience. Repair outcomes are self-reported.