Petrol engine hesitates under load but idles normally
Hesitation under load with normal idle can expose ignition weakness, but fuel supply, boost control on applicable engines or mechanical problems can overlap. The load pattern selects tests; it does not establish that a coil has failed.
Save the loaded event
Record gear, speed, temperature and the exact fault/cylinder pattern. Identify engine and recent plug work. Avoid repeated full-throttle attempts, particularly with a flashing warning or severe misfire.
Test ignition alongside supporting inputs
A workshop should inspect plug specification, gap/condition and coil/connector integrity. Increased load can expose insulation weakness not apparent at idle. A controlled swap supports a diagnosis when the fault follows the component under equivalent conditions.
If it stays, assess local wiring, injection and compression as indicated. If several cylinders are affected, compare shared fuel delivery and air/pressure measurements. Replacing an oxygen sensor because it reports an abnormal mixture can miss the combustion defect creating that signal.
Verify the same demand safely
Repair the demonstrated ignition or other fault and use a controlled professional load check. A smooth idle after installing parts is not verification of a load-only complaint. Keep the original event record so a changed symptom can be distinguished from a complete repair.
Outcome & verification
Confirm appropriate cylinder contribution and supporting data through the original safe load range, without renewed relevant faults.
Community discussion
Owner experiences, questions and other possible solutions.
No owner experiences yet. Share what was checked and what happened.
Sign in to share your experienceHelpful votes reflect community experience. Repair outcomes are self-reported.