Air conditioning blows air but does not cool
Normal airflow with little cooling points towards refrigeration or its control, whereas weak airflow also needs an air-path investigation. The i30 GD's actual compressor and climate configuration must be identified before a familiar clutch or recharge diagnosis is applied.
Establish the operating condition
Record ambient and vent temperatures, idle versus road operation and whether cooling ever returns. Check blower delivery and relevant climate/engine faults. A compressor pulley rotating does not establish that the system is producing the required refrigeration effect.
Compare airflow, charge and command
An A/C workshop should inspect condenser airflow, fan request/response and pressure/temperature behaviour. Recovering and weighing refrigerant where appropriate provides different evidence from one static pressure reading. A previous recharge does not prove correct quantity or leak-free operation.
If charge is correct, inspect compressor control, sensing and air mixing according to the fitted system. Warm air can result from a blend-control problem even when refrigeration is working. Do not bridge pressure protection or add refrigerant until something becomes colder.
Repair the demonstrated limitation
Correct the verified leak, airflow, control or mechanical defect and charge to the specified quantity if the circuit was opened. Run long enough to expose heat-dependent loss rather than judge a few seconds of cool air.
Outcome & verification
Confirm sustained cooling, normal airflow and appropriate fan/control behaviour under the original condition. Keep any unverified leak-retention interval explicit.
Community discussion
Owner experiences, questions and other possible solutions.
No owner experiences yet. Share what was checked and what happened.
Sign in to share your experienceHelpful votes reflect community experience. Repair outcomes are self-reported.