AI4Car

ABS warning remains illuminated

i30 GDBrakes & stability
The problem

An ABS warning on an i30 GD can originate in a wheel signal, electrical supply or another brake-control input. It does not identify a sensor by itself. Braking condition and the complete brake-module code determine the next step.

Separate an amber warning from unsafe braking

Record all messages, fluid level concerns and any changed pedal or pulling. Obtain ABS-specific diagnostics; a basic engine reader may not access the controller. A red brake warning or abnormal pedal needs urgent assessment before any road test.

Compare electrical and mechanical signal sources

A workshop should inspect the indicated circuit and compare wheel speeds through a safe controlled test. A dropout can involve wiring, a sensor, bearing/encoder condition or installation after recent work. A new sensor cannot correct a damaged target.

Check harness routing where the suspension moves. Electrical circuit faults require a different test from a plausible voltage but incorrect speed relationship. Use the fitted sensor's procedure rather than assume every sensor is meaningfully tested with a resistance check.

Verify the original event

Repair the demonstrated defect and repeat the relevant speed/turn condition safely. Confirm the signal remains consistent and the fault does not return after its assessment. The warning briefly going out after moving is not sufficient for an intermittent dropout.

Outcome & verification

Retain consistent wheel-speed evidence and a post-repair brake-controller result, with remaining stability/communication issues identified separately.

Do not rely on ABS or stability assistance while warnings remain. Stop for fluid loss, a red brake warning or abnormal pedal and arrange safe repair.
Discuss this problem ↓

Community discussion

Owner experiences, questions and other possible solutions.

No owner experiences yet. Share what was checked and what happened.

Sign in to share your experience

Helpful votes reflect community experience. Repair outcomes are self-reported.