Vibration changes markedly when Drive is selected
Selecting Drive changes engine load and the forces carried by its mounts. Stronger vibration does not automatically diagnose a transmission fault; engine imbalance, isolation and contacting components can become more apparent under that load.
Confirm the actual transmission and pattern
Record warm idle in Neutral, Drive and Reverse where safe, plus the effect of A/C. Identify the gearbox before interpreting clutch behaviour. Keep a stationary vibration separate from shudder occurring only as the car moves away.
Compare engine response and physical isolation
A workshop should inspect available cylinder data and idle compensation, then check mounts and surrounding clearances if combustion is even. A stable displayed RPM can hide small variations, while a visibly moving engine is not a calibrated mount test.
If judder occurs during take-off rather than at a stationary idle, follow the relevant clutch/transmission branch. Do not apply a DPS6 clutch repair to every automatic Focus or use a mount replacement to mask a proven misfire.
Verify the load condition safely
Repair the demonstrated engine, support or driveline defect. Adaptation changes cannot repair a collapsed mount or an exhaust touching the body. Loaded tests should be controlled by trained personnel with the vehicle secured appropriately.
Outcome & verification
Compare the same warm operating states after repair and confirm both engine quality and cabin isolation. Document any remaining take-off disturbance separately.
Community discussion
Owner experiences, questions and other possible solutions.
No owner experiences yet. Share what was checked and what happened.
Sign in to share your experienceHelpful votes reflect community experience. Repair outcomes are self-reported.