No-crank condition appears with a transmission warning
A no-crank event accompanied by a DPS6 warning can involve start authorization, selected-position information or supply, as well as a transmission-control fault. It must first be distinguished from an engine that cranks normally but will not fire.
Record the authorization state
Save engine, transmission and body/security faults while the failure is present. Note displayed gear, key messages and whether lights dim or a starter click occurs. A jump start changing the symptom is evidence to investigate, not proof of a battery-only cause.
Compare request, permission and starter delivery
A workshop should establish whether the start request is received and the required transmission position is recognized. If permission is absent, investigate the failed input or control path. If permission is present but the starter does not operate, test the starter supply and circuit separately.
Check loaded battery and earth performance before replacing a control module. Do not bridge starter or interlock circuits; bypassing authorization can make the vehicle move unexpectedly and destroys the diagnostic distinction.
Verify the original intermittent sequence
Correct the demonstrated supply, position, communication or control defect and carry out required setup. A module replacement needs proper compatibility and programming, not simply physical installation. Retain the failing data for comparison if the event is intermittent.
Outcome & verification
Confirm repeatable starting with correct position recognition and reliable subsequent engagement under the original conditions. A single successful workshop start is incomplete evidence.
Community discussion
Owner experiences, questions and other possible solutions.
No owner experiences yet. Share what was checked and what happened.
Sign in to share your experienceHelpful votes reflect community experience. Repair outcomes are self-reported.