Rough idle during the first cold-start minute
A rough first cold minute needs a genuine cold-start sample. Ignition, injector behaviour, intake leaks, temperature information and mechanical sealing can overlap; petrol and diesel Focus engines require different diagnostic branches.
Preserve the cold pattern
Record ambient temperature, cranking behaviour, smoke and how quickly roughness disappears. Save cylinder misfire or smooth-running data before warming the engine. A workshop appointment after a long drive may not reproduce the complaint.
Follow the cylinder pattern
On petrol engines, a controlled coil or plug swap is useful only if the misfire moves with the tested component under comparable conditions. A fault staying on one cylinder calls for local wiring, injector and mechanical checks. Several cylinders suggest shared air, fuel or temperature inputs.
On diesels, assess the fitted glow system, injector behaviour and starting conditions instead of applying a petrol ignition diagnosis. A cold temperature reading should be plausible for the environment before it is used to judge warm-up fuelling.
Require evidence before cleaning or major work
Deposits are one possibility on applicable engines, not a conclusion from cold roughness alone. Compare compression or injector evidence where indicated. Chemical cleaning or replacing every coil without a failed test can leave the real cause untouched.
Outcome & verification
Repeat the first start after a comparable soak and compare the same cylinder information. Smooth warm idle is not verification of a cold-only repair.
Community discussion
Owner experiences, questions and other possible solutions.
No owner experiences yet. Share what was checked and what happened.
Sign in to share your experienceHelpful votes reflect community experience. Repair outcomes are self-reported.