Airbag warning stays on after startup
An airbag warning means restraint-system operation needs diagnosis; it does not specify which part is defective or guarantee protection will work normally. Seat wiring, supply events, sensors and other faults must be distinguished using the actual restraint-controller record.
Preserve the exact fault
Record whether the warning appeared after moving a seat, interior work or a weak-battery event. Obtain the complete restraint-specific code and status. An engine-code reader usually cannot provide this information, and clearing a warning loses useful context.
Follow the identified circuit safely
A qualified workshop should inspect the relevant circuit using the manufacturer's restraint precautions and approved test equipment. A seat-related fault can involve a connector or moving harness, but its location does not prove a particular component failed.
Do not measure an airbag or pretensioner with an ordinary meter, install a bypass resistor or unplug connectors experimentally. An undervoltage history can be secondary, yet a fault that returns with stable supply requires its own investigation.
Confirm a repair rather than a suppressed lamp
Correct the demonstrated wiring or component defect using approved repair methods. After the specified power-down and recovery procedures, verify the normal warning self-check and repeat the original safe trigger, such as seat movement, where appropriate.
Outcome & verification
Retain the pre-repair code, actual fault found and post-repair restraint diagnostic result. A temporarily extinguished lamp after memory clearing does not establish restored protection.
Community discussion
Owner experiences, questions and other possible solutions.
No owner experiences yet. Share what was checked and what happened.
Sign in to share your experienceHelpful votes reflect community experience. Repair outcomes are self-reported.