AI4Car
All codes

Transmission Range Sensor A Circuit Low

P0707 means the transmission range sensor circuit reports a low signal. Learn what to check before replacing parts.

What you may notice

Symptoms

  1. 01Warning light may illuminate
  2. 02Intermittent or implausible scan data
  3. 03Vehicle-specific symptoms may vary

Where to look first

Common causes

  1. 01An open or shorted circuit, poor connector contact, or range-switch fault can change the reported gear position.
  2. 02Wiring, connector, or ground fault
  3. 03Vehicle-specific mechanical or control issue

A sensible sequence

Best diagnostic order

  1. 01Save codes and freeze-frame information
  2. 02Confirm the indicated gear matches the selector, then test the range-switch circuit and connector using the vehicle wiring diagram.
  3. 03Confirm readings with vehicle-specific specifications
  4. 04Verify the repair under the conditions that set the code

Step by step

What to check and repair

  1. 01Confirm the indicated gear matches the selector, then test the range-switch circuit and connector using the vehicle wiring diagram.
  2. 02Repair only the verified cause and retest

Read the signals

Live-data clues

Related sensor or switch signal

Typical behavior
Plausible and consistent with the operating condition
Possible clue
An unexpected value or dropout helps localize the fault

What P0707 means

The transmission range sensor circuit reports a low signal. The code identifies an observed condition; it does not prove which part needs replacement.

Diagnostic direction

Confirm the indicated gear matches the selector, then test the range-switch circuit and connector using the vehicle wiring diagram.

Before clearing the code

Save stored and pending codes and freeze-frame data. Use service information for the exact vehicle before repair, then confirm the issue no longer returns.

Technical sources

Related codes