Catalyst Temperature Sensor Circuit (Bank 1, Sensor 1)
P0425 indicates the control module detected a fault in the Bank 1 Sensor 1 catalyst-temperature-sensor circuit. Learn what to inspect before replacing parts.
What you may notice
Symptoms
- 01Warning light may illuminate
- 02Intermittent or implausible live data
- 03Symptoms vary by vehicle
Where to look first
Common causes
- 01Open or shorted wiring, poor connector contact, a failed sensor, or a circuit supply/ground problem can set the code.
- 02Wiring or connector fault
- 03Vehicle-specific operating condition
A sensible sequence
Best diagnostic order
- 01Save codes and freeze-frame information
- 02Inspect the sensor harness near the exhaust for heat damage and test circuit power, ground, and signal to vehicle specifications.
- 03Compare live data with vehicle specifications
- 04Confirm the repair under the conditions that set the code
Step by step
What to check and repair
- 01Inspect the sensor harness near the exhaust for heat damage and test circuit power, ground, and signal to vehicle specifications.
- 02Repair the confirmed cause and verify the result
Read the signals
Live-data clues
Affected sensor or switch input
- Typical behavior
- Plausible and consistent with operating conditions
- Possible clue
- A fixed or intermittent value can help localize the circuit fault
| Parameter | Typical behavior | What it can suggest |
|---|---|---|
| Affected sensor or switch input | Plausible and consistent with operating conditions | A fixed or intermittent value can help localize the circuit fault |
What P0425 means
The control module detected a fault in the Bank 1 Sensor 1 catalyst-temperature-sensor circuit. This code describes an observed condition and does not prove that the sensor itself has failed.
Diagnostic direction
Inspect the sensor harness near the exhaust for heat damage and test circuit power, ground, and signal to vehicle specifications.
Before clearing the code
Save stored and pending codes and freeze-frame data. Use the procedure for the exact vehicle, repair the verified cause, and confirm the fault does not return.