Idle improves with electrical loads off: charging demand or marginal engine control?
Switching off blower, lights or demisting reduces demand, but improvement does not isolate the alternator. Extra load can expose a supply problem, a control issue or an engine already struggling with combustion.
Record load and actual speed together
Identify the engine/charging equipment and note which loads trigger the dip. Compare RPM, vibration and current cylinder behaviour; a steady speed with increased cabin shake is different from near-stalling.
Record battery/charging history and the exact fault context. A low resting battery reading does not prove that the alternator creates excessive mechanical load.
Compare electrical response with engine response
A workshop should assess charging command/output, connection losses and engine load-control behaviour under the triggering demand. A brief voltage transient needs interpretation, not automatic alternator replacement.
If misfire counters rise, investigate combustion as well. If electrical regulation is abnormal, test the supply/regulator branch. If RPM is steady but the body shakes, inspect mounting and resonance. Removing all accessories only changes the test condition; it does not establish a cure.
Repair the failed comparison
Correct a demonstrated battery, cable, charging, air-control or combustion fault. Do not raise idle mechanically or disable charging features to make the symptom disappear.
After repair, restore the original loads individually and together as appropriate. Keep temperature and selector conditions comparable so a warm traffic complaint is not judged from a cold no-load test.
Outcome & verification
Verify stable idle and appropriate electrical response under the original demand, without renewed faults or misfire. Document any remaining vibration separately from RPM control.
Community discussion
Owner experiences, questions and other possible solutions.
No owner experiences yet. Share what was checked and what happened.
Sign in to share your experienceHelpful votes reflect community experience. Repair outcomes are self-reported.