AI4Car

A new coil leaves the same cylinder misfiring: test what stayed at that cylinder

Corolla E170Engine & ignition
The problem

An unchanged misfire after coil replacement means the diagnosis needs more evidence. The replacement can be incorrect or badly seated, but plugs, wiring, injector function and mechanical condition remain independent possibilities.

Verify the replacement and the current event

Record engine, original/current cylinder codes and the exact replacement application. Confirm connector engagement and boot seating with the engine off. A historical stored code is not proof that the cylinder is still counting now.

Note cold-only, idle-only or load-dependent behaviour. Testing at a different temperature can make a healthy-looking result irrelevant to the original fault.

Follow the remaining cylinder-specific paths

Inspect the plug and its installation/condition, then assess coil supply/control where indicated. A connector or conductor that stayed with the cylinder did not change when the coil was replaced.

If ignition checks pass, investigate injector/circuit and mechanical sealing with appropriate equipment. A compression or leak-down finding should be interpreted against the symptom and test conditions. Shared air/fuel faults may still contribute, especially if more cylinders become affected.

Require a discriminating result before another part

A demonstrated plug, wiring, injector or cylinder fault justifies its own repair. Buying another coil because the first replacement did not help simply repeats an unproved hypothesis.

Keep a test map showing what moved, what stayed and how current counters responded. If two faults coexist, describe partial improvement separately rather than forcing one explanation for every remaining symptom.

Outcome & verification

Verify the same cylinder under the original condition and confirm the failed test now passes. An empty fault list immediately after clearing does not establish that combustion is repaired.

Stop for a flashing lamp, severe roughness or fuel smell. Avoid unsafe ignition probing and fuel-system disassembly without the proper procedure.
Discuss this problem ↓

Community discussion

Owner experiences, questions and other possible solutions.

No owner experiences yet. Share what was checked and what happened.

Sign in to share your experience

Helpful votes reflect community experience. Repair outcomes are self-reported.