T-GDi hesitates only under higher load
Higher-load hesitation on a T-GDi can expose ignition weakness, insufficient fuel delivery or a boost/air-control discrepancy. Idle smoothness does not exclude any of these, and the symptom alone cannot identify a high-pressure pump.
Capture the load event
Save full faults, cylinder information and relevant requested/actual pressure data. Record temperature, gear and recent plug, intake or fuel work. Identify the exact engine and distinguish hesitation from a deliberate reduced-power response.
Compare ignition, fuel and air together
A workshop should assess plug specification/condition and coil circuits alongside low- and high-pressure delivery where supported. A rail-pressure discrepancy needs its supply and measurement chain checked; it does not automatically condemn the high-pressure pump.
On the air side, inspect charge-path integrity, pressure plausibility and the fitted turbo-control response. A leak or misfire can change demand and confuse interpretation of one instantaneous pressure reading. Use the original event sequence to identify what failed first.
Verify the demonstrated correction under control
Repair the proven ignition, fuel or boost defect and perform a safe equivalent load check. Do not increase boost, alter actuator settings or replace fuel parts by exclusion. A smooth stationary rev does not reproduce cylinder pressure and delivery demand under road load.
Outcome & verification
Confirm appropriate cylinder contribution and requested/actual fuel/air response through the original safe load range, with no renewed relevant fault.
Community discussion
Owner experiences, questions and other possible solutions.
No owner experiences yet. Share what was checked and what happened.
Sign in to share your experienceHelpful votes reflect community experience. Repair outcomes are self-reported.