Several warnings appear on the first cold start
Several warnings on the first cold start can share one supply interruption, but they should not all be assumed harmless. The priority is comparing their timing and identifying which return after stable power is established.
Preserve the complete scan
Record cranking speed, warning order and recent battery work. Save faults from relevant modules before clearing. Historic undervoltage from one discharge differs from a current steering or brake fault that returns independently.
Measure common supply under the event
A workshop should charge/assess the battery and check loaded voltage drops across supply and earth paths during cranking. Normal resting voltage does not establish starter-load performance. A poor connection can affect many controllers simultaneously.
Verify charging and, if required, parked consumption so a new battery does not merely mask the cause. Once power is sound, retest remaining module faults using their own procedures rather than replace several controllers or dismiss them all as battery effects.
Verify safety functions separately
Correct the demonstrated common supply problem and complete any required recovery/setup from the actual diagnostic results. Check braking, steering and other affected functions before road use. A warning-free restart alone cannot prove those systems function normally.
Outcome & verification
Retain pre/post scans and stable start-supply evidence, with resolved voltage events distinguished from remaining component faults.
Community discussion
Owner experiences, questions and other possible solutions.
No owner experiences yet. Share what was checked and what happened.
Sign in to share your experienceHelpful votes reflect community experience. Repair outcomes are self-reported.