Engine cranks but does not start
Normal-speed cranking without starting needs a different path from slow cranking or no starter response. A Ceed can lack authorization, engine-speed/synchronization information, fuel delivery or combustion capability; engine identity determines the tests.
Capture the non-start state
Record cold/hot pattern, key/security indications and recent work or refuelling. Save faults while the event exists and compare available cranking-speed and synchronization information. A later successful start can erase the opportunity to observe an intermittent failed input.
Compare permission and combustion requirements
A workshop should establish that a valid start is requested and recognized. Petrol versions need the relevant ignition/fuel checks; CRDi versions need their appropriate pressure/injection and preheat assessment. Hearing a fuel pump run does not demonstrate sufficient delivery.
If synchronization is absent or cranking sounds uneven, inspect signal integrity and mechanical timing as indicated. A code or missing speed value does not uniquely prove a crank sensor; wiring, supply and its target require assessment too.
Verify the original interval
Repair the demonstrated electrical, fuel, authorization or mechanical fault and repeat the same cold soak or hot parking condition. A one-off successful start is recovery evidence, not proof that an intermittent cause was corrected.
Outcome & verification
Confirm repeatable starting with appropriate cranking inputs and no renewed relevant fault, retaining the actual failed test and repair finding.
Community discussion
Owner experiences, questions and other possible solutions.
No owner experiences yet. Share what was checked and what happened.
Sign in to share your experienceHelpful votes reflect community experience. Repair outcomes are self-reported.