Vehicle handbook
Hyundai Santa Fe DM
2012–2018 · Symptoms, fault codes and practical repair explanations
Choose a vehicle system
Problem guides
Showing 1–6 of 6
Power tailgate reaches closed but does not latch
On a Santa Fe DM with the power-tailgate option, failure at final closure is different from the gate stopping halfway. Latch state, close assistance, alignment and supply need separate checks. A flush-looking panel does not independently establish secure physical retention.
Front end shakes during braking at road speed
A Santa Fe DM brake-related shake can involve friction/runout variation, hub mounting, caliper release or chassis compliance. A tyre vibration can coexist. The sensation alone cannot justify declaring the discs warped or replacing every front suspension component.
2.2 CRDi cranks for a long time before starting
A Santa Fe DM 2.2 CRDi with prolonged cranking needs start speed, low-pressure supply and rail-pressure build-up assessed. It is different from the previously described stall under load. A pressure-related result identifies a missing outcome, not automatically a failed high-pressure pump.
Diesel hisses under load and loses pulling power
A diesel Santa Fe DM with a load-related hiss and reduced power may have a charge-air leak, but turbo control and fuel/exhaust limitations remain alternatives. An oily hose joint is useful evidence only when the leak is demonstrated. Different diesel versions require their own pressure and actuator checks.
AWD warning or missing rear drive under load
On an AWD Santa Fe DM, lack of rear assistance can come from control inputs, the coupling or a mechanical drive path. A front-drive version has no equivalent rear system. Diagnosis should establish whether rear torque was requested and whether it was transmitted, rather than replacing the most discussed coupling component first.
Electric parking brake remains applied after parking
A Santa Fe DM with the electric parking-brake option needs a distinction between electrical release failure and a mechanically sticking rear brake. Low supply, controller prerequisites and actuator faults can prevent release, but replacing a motor does not cure a seized mechanism. Vehicles without this option require another procedure.
Your experience can help another driver
Open a guide to share your checks and repair outcome.
