AI4Car

Vehicle handbook

Ford S-MAX Mk2

2015–2023 · Symptoms, fault codes and practical repair explanations

Quick browse

Choose a vehicle system

Problem guides

Showing 1–6 of 6

Airbag warning changes after moving a front seat

An S-MAX Mk2 restraint warning linked to seat movement makes the local harness and connections relevant, but the exact circuit and fault must be read. Seat occupancy, belt/pretensioner and airbag equipment vary. A loose-looking connector is not authority to unplug or bypass a restraint component.

Body & restraint systems

Diesel loses coolant without a clear external puddle

A diesel S-MAX Mk2 can conceal coolant leakage behind covers or lose fluid through an internal path. A dry driveway does not establish head-gasket failure or an EGR-cooler leak. Identify the engine circuit and investigate fresh evidence before choosing a repair from another diesel model.

Cooling & engine systems

Front air conditioning cools but the rear cabin stays warm

An S-MAX Mk2 with optional rear climate equipment needs its actual rear air and refrigeration layout identified. Front cooling does not prove that rear airflow, controls or refrigerant distribution are correct. This is distinct from the front blower stopping electrically after warming.

Climate & rear air conditioning

Cabin blower stops after warming up while the display stays on

On an S-MAX Mk2, a climate display remaining active while airflow stops suggests a blower power/control or motor issue rather than automatically a refrigerant fault. Different front/rear climate options have separate components. Identify which fan stops and whether airflow is absent or merely redirected.

Climate & electrical

PowerShift leaks fluid and delays engaging a direction

On an S-MAX Mk2 with the applicable wet-clutch PowerShift, a leak together with delayed engagement makes fluid integrity important. Other automatic variants need their own procedure. The place fluid lands can be remote from its source, and a delay is not automatically proof that the clutch pack needs replacement.

Transmission & hydraulic control

TDCi loses pulling power uphill: compare air pressure with fuel demand

A diesel S-MAX Mk2 that loses power under sustained load may have a charge-air leak, boost-control fault, restricted exhaust or fuel-delivery problem. The engine and actuator arrangement vary by version. A low-boost code describes the missing result; it does not prove the turbocharger is the failed part.

Engine & boost controlP0299

Your experience can help another driver

Open a guide to share your checks and repair outcome.