P2015 after a new manifold: test the control parts that were not replaced
Replacing the manifold does not necessarily replace the complete runner-control system. A continuing position/performance fault can involve the actuator supply, changeover valve, wiring, incompatible parts or an incomplete setup. The original code should be compared with the returning event before another assembly is ordered.
Verify installation and compatibility
Record the engine code, replacement reference and which external components were transferred. Check linkage engagement, hose routing and connector locking. A unit that bolts on can still be unsuitable for the exact control arrangement.
Confirm that the fault has been newly evaluated rather than merely remaining in memory from before replacement. Save the current event conditions before clearing.
Compare command, motion and feedback
A workshop should use the appropriate output test and observe both actual travel and reported position. If the manifold can move but does not receive the expected actuation, test its supply or vacuum-control path. If motion is complete but feedback is implausible, assess the signal circuit and compatible sensor arrangement.
Any required adaptation follows correct installation and functioning control. A failed routine should be investigated from its prerequisites and result, not repeated until the warning temporarily disappears. Guidance for one intake configuration is not universal across B8 engines.
Reassess the original diagnosis
If the old manifold was replaced without a failed mechanical test, investigate the remaining circuit before assuming the new one is also defective. Keep any evidence of an old worn linkage separate from a second control fault that may coexist.
Outcome & verification
Confirm full requested movement, consistent position feedback and completion of the appropriate diagnostic under the original conditions. A fitted new manifold and a cleared code do not prove runner control has recovered.
Community discussion
Owner experiences, questions and other possible solutions.
No owner experiences yet. Share what was checked and what happened.
Sign in to share your experienceHelpful votes reflect community experience. Repair outcomes are self-reported.