Cam correlation fault with rough running: verify mechanical timing before a sensor swap
A camshaft/crankshaft correlation fault means the controller sees a relationship outside its expected range. Incorrect timing, adjustment faults and signal problems can all be involved. On a rough-running TFSI, the risk of a mechanical error should be assessed before continued starting or driving.
Preserve the complete fault record
Record the exact code, status, environmental data and any startup rattle. Note recent timing, cylinder-head or oil-system work. Identify the engine code; B8 engines do not all use the same timing arrangement or control reference.
Do not clear the fault simply to see whether the engine will start better. The original relationship and accompanying events are useful evidence.
Check the mechanical and signal branches
A workshop should verify mechanical timing with the proper locking and inspection procedure where indicated. Cam-control data can support the assessment but do not replace physical verification when timing may have moved. Oil supply and adjuster operation also need consideration if the basic indexing is correct.
If a signal defect is suspected, inspect wiring, connectors and waveform relationship using an appropriate reference. A code containing 'camshaft sensor' in a generic description is not proof that the sensor is defective. Likewise, a new sensor does not validate the chain or adjuster.
Assess consequences before returning to service
Where timing has moved, inspect for damage as required by the findings before restarting. Repairing the relationship alone may not address a valve-sealing problem created by the event. If timing is correct, document the demonstrated electrical or control cause instead of fitting a chain by exclusion.
Outcome & verification
Confirm stable cam/crank relationship, appropriate adjustment response and smooth operation after the actual repair. Retain mechanical verification and diagnostic records rather than only a cleared fault memory.
Community discussion
Owner experiences, questions and other possible solutions.
No owner experiences yet. Share what was checked and what happened.
Sign in to share your experienceHelpful votes reflect community experience. Repair outcomes are self-reported.